DIAMOND SERIES

Diamond Series

Diamond Series is made of special silicone-acrylic emulsion, sand, and additives. Its appearance is elegant with a strong European style.

Product Structure

Base Material/Substrate
Primer
Diamond Stone Coating
Clear Top Coating

Items needed for
application

Paint roller

Trowel

Batch Knife

Technical Specification

Surface Drying Time: About 8 Hours

Coverage Rate: About 2-3.5kg/m2

Construction Thickness: 1.5 – 2mm

Package Specification: 5KG / 20KG Barrel

Installation Process

Installation Guide

Ensure that the surface is clean and pre-treated with waterproofing agents
Apply a skim coating to provide a level/plumb surface and sand the surface thereafter.
Check that the surface is clean and free from oil and dirt residue to ensure a strong bond.
Apply a surface primer that is compatible with the substrate
(concrete, glass, aluminum, steel, wood, etc.)
Use a stainless steel batch knife and scrape it to allow the surface to dry, then scrape again.
Drying time is >4 hours and may vary depending on temperature and humidity.
Once the surface is dry, use the stainless steel batch knife to flatten the surface and ensure it is flat.
Apply the clear topcoat. For exterior use: Re-apply additional topcoat sealer for additional protection against fading.

Product List

Our water based multi color stone coating has been applied on projects around the world. We have had success in emulating actual stone at a fraction of the cost and time required of natural stone products.